Suture Anchor Devices Market

Suture Anchor Devices Market Forecast and Outlook 2025 to 2035

The global suture anchor devices market is projected to grow from USD 0.84 billion in 2025 to approximately USD 1.2 billion by 2035, recording an absolute increase of USD 359.3 million over the forecast period. This translates into a total growth of 42.9%, with the market forecast to expand at a compound annual growth rate (CAGR) of 3.6% between 2025 and 2035.

The overall market size is expected to grow by nearly 1.4X during the same period, supported by increasing demand for minimally invasive orthopedic procedures, rising adoption of arthroscopic surgery techniques, and growing emphasis on sports injury treatment across global healthcare operations.

Quick Stats for Suture Anchor Devices Market

• Suture Anchor Devices Market Value (2025): USD 0.84 billion
• Suture Anchor Devices Market Forecast Value (2035): USD 1.2 billion
• Suture Anchor Devices Market Forecast CAGR: 3.6%
• Leading Product in Suture Anchor Devices Market: Non-absorbable (55.1%)
• Key Growth Regions in Suture Anchor Devices Market: North America, Europe, and Asia Pacific
• Key Players in Suture Anchor Devices Market: Smith & Nephew plc (10.2%), Zimmer Biomet Holdings Inc., CONMED Corporation, Arthrex Inc., Johnson & Johnson Services Inc. (DePuy Synthes Inc.), Stryker (Wright Medical Group Inc.), Parcus Medical LLC (Medacta International), OrthoMed Inc., Enovis Corporation, Medtronic

Non-absorbable suture anchors account for 55.1% of the market due to superior mechanical strength characteristics and proven operational durability in high-load bearing applications. This segment addresses both fixation stability requirements and long-term anchoring considerations while providing reliable performance across diverse surgical procedures. The biomechanical properties of non-absorbable anchors make them particularly valuable in rotator cuff repairs and shoulder stabilization surgeries requiring permanent tissue-to-bone fixation capabilities.

However, adoption of absorbable suture anchor technology remains significant at 44.9% market share in applications where biocompatibility considerations, tissue healing integration, and elimination of hardware-related complications are prioritized, particularly in pediatric patients and soft tissue repairs where gradual resorption offsets mechanical strength trade-offs. Advances in anchor design technologies, biomaterial engineering, and arthroscopic instrumentation are improving surgical outcomes and patient recovery efficiency across orthopedic specialties.

Material dynamics reveal bio-absorbable suture anchors commanding 50% market share, driven by intensive biomaterial innovation programs and foreign body reaction elimination requirements. Metallic suture anchors represent 45% of material demand, highlighting the critical role of titanium and stainless steel constructs in managing high-stress anatomical locations during load-bearing phases. Tying type segmentation shows knotless anchors gaining prominence at 60% share within surgical technique categories, valued for simplified deployment procedures and reduced operative time characteristics in arthroscopic environments.

Regionally, North America leads with 41.0% market share, driven by advanced arthroscopic surgery adoption, high sports participation rates, and established reimbursement infrastructure. Europe follows with 28.0% market share, supported by Germany (3.2% CAGR) showing steady growth through elderly population demographics and minimally invasive surgery preferences.

Asia Pacific commands 25.0% market share with markets such as China (4.8% CAGR) and India (5.0% CAGR) experiencing rapid expansion driven by healthcare infrastructure development, increasing orthopedic procedure volumes, and rising sports medicine awareness. More dynamic markets such as Brazil (4.0% CAGR), Japan (3.8% CAGR), and Saudi Arabia (4.3% CAGR) demonstrate strong momentum tied to surgical center expansion, orthopedic specialization, and medical tourism development in established and emerging healthcare markets.

Between 2025 and 2030, the suture anchor devices market is projected to expand from USD 0.84 billion to USD 1,003.4 million, resulting in a value increase of USD 165.5 million, which represents 46.1% of the total forecast growth for the decade. This phase of development will be shaped by rising demand for arthroscopic shoulder procedures, increasing applications in sports medicine, and growing penetration in rotator cuff repair techniques. Orthopedic surgeons are expanding their suture anchor utilization to address the growing demand for minimally invasive and anatomically optimized fixation systems in various surgical applications and joint stabilization categories.

From 2030 to 2035, the market is forecast to grow from USD 1,003.4 million to USD 1.2 billion, adding another USD 193.8 million, which constitutes 53.6% of the overall ten-year expansion. This period is expected to be characterized by the expansion of all-arthroscopic surgical techniques, the integration of innovative anchor design platforms, and the development of specialized constructs for specific anatomical segments. The growing adoption of outpatient surgery standards and value-based healthcare mandates will drive demand for ultra-high performance suture anchor systems with enhanced pullout strength specifications and consistent biocompatibility characteristics.

Suture Anchor Devices Market Key Takeaways

Metric	Value
Estimated Value in (2025E)	USD 0.84 billion
Forecast Value in (2035F)	USD 1.2 billion
Forecast CAGR (2025 to 2035)	3.6%

Why is the Suture Anchor Devices Market Growing?

Market expansion is being supported by the increasing demand for arthroscopic surgery solutions and the corresponding need for high-quality suture anchors in orthopedic applications across global surgical operations. Modern orthopedic surgeons are increasingly focused on advanced fixation devices that can improve surgical outcomes, reduce recovery time, and enhance tissue-to-bone healing while meeting stringent biomechanical requirements. The proven efficacy of suture anchors in various joint stabilization applications makes them an essential component of comprehensive arthroscopic surgery strategies and sports medicine treatment programs.

The growing emphasis on minimally invasive techniques and patient outcome optimization is driving demand for high-performance suture anchors that meet stringent fixation specifications and operational requirements for orthopedic applications. Surgeons' preference for reliable, biocompatible fixation systems that can ensure consistent biomechanical outcomes is creating opportunities for innovative anchor designs and customized material solutions. The rising influence of clinical evidence standards and surgical technique protocols is also contributing to increased adoption of premium-grade suture anchors across different orthopedic applications and joint repair procedures requiring advanced fixation technology.

Opportunity Pathways - Suture Anchor Devices Market

The suture anchor devices market represents a specialized growth opportunity, expanding from USD 0.84 billion in 2025 to USD 1.2 billion by 2035 at a 3.6% CAGR. As orthopedic surgeons prioritize surgical efficiency, patient recovery, and fixation strength in complex arthroscopic procedures, suture anchor systems have evolved from a specialized orthopedic implant to an essential component enabling soft tissue repair, ligament reconstruction, and multi-joint stabilization operations across surgical networks and specialized sports medicine applications.

The convergence of arthroscopic surgery expansion, increasing sports injury prevalence, aging population demographics, and minimally invasive procedure mandates creates momentum in demand. High-quality designs offering superior pullout strength, cost-effective fixation systems balancing functionality with economics, and specialized constructs for critical anatomical applications will capture market premiums, while geographic expansion into high-growth Asian healthcare markets and emerging surgical sector penetration will drive volume leadership. Orthopedic surgeon emphasis on surgical precision and patient outcomes provides structural support.

Segmental Analysis

The market is segmented by product, material, tying type, end-use, and region. By product, the market is divided into non-absorbable and absorbable. Based on material, the market is categorized into metallic suture anchors, bio-absorbable suture anchors, and others. By tying type, the market is divided into knotless and knotted suture anchors. By end-use, the market is categorized into hospitals, ambulatory surgical centers, and clinics. Regionally, the market is divided into North America, Europe, Asia Pacific, Latin America, and Middle East & Africa.

Which Product Category Exhibits Market Leadership?

The non-absorbable segment is projected to account for 55.1% of the suture anchor devices market in 2025, reaffirming its position as the category's dominant product type. Orthopedic surgeons increasingly recognize the optimal balance of fixation strength and long-term stability offered by non-absorbable suture anchors for most joint repair applications, particularly in shoulder stabilization and rotator cuff reconstruction procedures. This product addresses both biomechanical load requirements and permanent fixation considerations while providing reliable performance across diverse surgical indications.

This product forms the foundation of most high-load bearing repair protocols for orthopedic surgery, as it represents the most widely accepted and clinically validated permanent fixation technology in the sports medicine industry. Biomechanical testing standards and extensive clinical outcome data continue to strengthen confidence in non-absorbable suture anchor systems among orthopedic surgeons and sports medicine specialists. With increasing recognition of the anatomical stress demands and revision surgery prevention requirements in joint repair operations, non-absorbable anchor systems align with both surgical excellence and long-term durability goals, making them the central growth driver of comprehensive tissue fixation strategies.

Which Material is Highly Preferred for Manufacturing Suture Anchor Devices?

Bio-absorbable suture anchors are projected to represent 50% of material demand in 2025, underscoring their role as a leading material segment driving market innovation and adoption. Surgeons recognize that bio-absorbable material requirements, including gradual resorption properties, elimination of permanent hardware concerns, and bone remodeling facilitation, offer distinct advantages that permanent metallic constructs cannot provide while maintaining adequate initial fixation strength. Bio-absorbable suture anchors offer enhanced tissue integration and reduced imaging artifact complications in orthopedic applications.

The segment is supported by the advanced nature of polymer biomaterial development, requiring sophisticated degradation kinetics engineering, and the increasing recognition that bio-absorbable solutions can deliver adequate mechanical performance and eliminate long-term implant-related complications. Additionally, surgeons are increasingly adopting patient-centered care approaches that favor implants requiring no removal procedures for optimal treatment outcomes. As understanding of bone-implant interface biology advances and material science capabilities improve, bio-absorbable suture anchors will continue to play an expanding role in comprehensive fixation strategies within the orthopedic surgical market.

Which Typing Type Category Dominates in the Suture Anchor Devices Market?

The knotless tying type segment is projected to account for 60% of the suture anchor devices market in 2025, establishing its position as the leading surgical technique category. Orthopedic surgeons increasingly recognize the optimal balance of deployment simplicity and procedure efficiency offered by knotless anchor technology for arthroscopic applications, particularly in confined joint spaces and complex anatomical repairs. This tying type addresses both surgical time requirements and technical complexity considerations while providing proven fixation performance across demanding arthroscopic procedures.

The segment is supported by the streamlined nature of knotless deployment mechanisms, requiring fewer surgical steps and reduced arthroscopic skill demands, and the increasing recognition that knotless systems can deliver equivalent biomechanical stability with improved surgical workflow advantages. Additionally, surgeons are increasingly adopting arthroscopic efficiency protocols that favor simplified instrumentation for consistent operative time management. As understanding of suture-anchor interaction mechanics advances and surgical technique preferences evolve, knotless anchor technology will continue to serve the predominant role in comprehensive arthroscopic strategies within sports medicine and orthopedic markets.

By End-use, How Does Hospitals Segment Drive Market Growth?

The hospitals end-use segment is projected to account for 65% of the suture anchor devices market in 2025, establishing its position as the dominant healthcare setting category. Healthcare administrators recognize that hospital surgical departments offer comprehensive infrastructure, specialized orthopedic services, and multidisciplinary care capabilities that ambulatory centers cannot fully replicate for complex joint repair procedures. Suture anchor procedures in hospitals benefit from integrated perioperative support and advanced imaging capabilities.

The segment is supported by the resource-intensive nature of arthroscopic surgery programs, requiring specialized equipment and trained personnel, and the increasing recognition that hospital-based orthopedic departments can handle more complex patient populations and revision procedures. Additionally, reimbursement structures in many markets continue to favor hospital-based surgical settings for orthopedic procedures requiring implantable devices. As surgical volume growth continues and patient complexity increases, hospital settings will maintain the central role in comprehensive orthopedic care delivery within the suture anchor device market.

What are the Drivers, Restraints, and Key Trends of the Suture Anchor Devices Market?

The suture anchor devices market is advancing steadily due to increasing recognition of arthroscopic surgery's importance and growing demand for minimally invasive fixation systems across the orthopedic sector. However, the market faces challenges, including device cost considerations in price-sensitive markets, potential for anchor pullout complications under high-load conditions, and concerns about reimbursement variability for certain outpatient procedures. Innovation in anchor geometry designs and customized material compositions continues to influence product development and market expansion patterns.

Expansion of Sports Medicine Programs and Arthroscopic Surgery Technologies

The growing adoption of sports medicine specialization is enabling the development of more sophisticated suture anchor applications and fixation systems that can meet stringent biomechanical requirements. Orthopedic sports medicine practices offer comprehensive demand for suture anchors, including high-strength and all-suture formulations that are particularly important for achieving anatomical restoration in shoulder and knee applications. Advanced fixation technologies provide access to minimally invasive repair techniques that can optimize healing outcomes and accelerate return to activity while maintaining cost-effectiveness for healthcare systems.

Integration of Value-based Healthcare Models and Outpatient Surgery Systems

Modern healthcare organizations are incorporating efficiency technologies such as all-arthroscopic techniques, rapid recovery protocols, and outcomes tracking integration to enhance suture anchor utilization and surgical value delivery. These approaches improve cost-effectiveness, enable same-day discharge capabilities, and provide better coordination between surgical intervention and rehabilitation protocols throughout the recovery cycle. Advanced surgical planning capabilities also enable customized anchor selection and early identification of fixation failures or biological healing issues, supporting reliable clinical efficiency.

Analysis of the Suture Anchor Devices Market by Key Countries

Country	CAGR (2025 to 2035)
India	5.0%
China	4.8%
Saudi Arabia	4.3%
Brazil	4.0%
Japan	3.8%
USA	3.5%
Germany	3.2%

The suture anchor devices market is experiencing varied growth globally, with India leading at a 5.0% CAGR through 2035, driven by expanding healthcare access and rising geriatric population requiring orthopedic interventions across developing medical centers. China follows at 4.8%, supported by increasing orthopedic surgery volumes and advanced healthcare system adoption among urban populations. Saudi Arabia records 4.3% growth, with healthcare facility expansion and surgical center development gaining momentum through national health programs.

Brazil shows 4.0% growth, representing growing sports participation and orthopedic procedure accessibility. Japan demonstrates 3.8% growth, emphasizing technological innovation and aging population care needs. USA records 3.5% growth with established sports medicine infrastructure and high injury prevalence, while Germany shows 3.2% growth, representing elderly demographic pressures and minimally invasive surgery adoption in European healthcare markets.

What Drives Demand for Suture Anchor Devices in India?

The suture anchor devices market in India is projected to exhibit robust growth with a CAGR of 5.0% through 2035, driven by expanding healthcare infrastructure development and increasing recognition of arthroscopic surgery as an essential treatment modality for joint injuries and sports medicine conditions.

The country's growing middle-class population and improving insurance coverage are creating significant opportunities for suture anchor adoption across both tertiary care hospitals and specialized orthopedic centers. Major international and domestic medical device companies are establishing comprehensive distribution and training networks to serve the growing population of orthopedic surgeons and sports medicine specialists requiring advanced fixation devices across shoulder and knee applications throughout India's major metropolitan areas.

The Indian government's strategic emphasis on healthcare accessibility and medical device manufacturing is driving substantial investments in specialized orthopedic care capabilities. This policy support, combined with the country's large patient population and expanding surgical volume, creates a favorable environment for suture anchor market development. Indian orthopedic surgeons are increasingly focusing on minimally invasive techniques to improve patient outcomes, with suture anchors representing a key component in this surgical transformation.

• Government initiatives supporting healthcare infrastructure expansion and medical education are driving demand for advanced orthopedic fixation devices.
• Surgical training program development and arthroscopic technique dissemination are supporting appropriate utilization of suture anchors among surgeons and healthcare facilities nationwide.
• Multi-specialty hospitals and dedicated orthopedic centers are increasingly integrating arthroscopic surgery capabilities into service offerings, creating new market opportunities.
• Rising sports participation and growing awareness of treatment options are accelerating surgical intervention adoption.

Why does China Demonstrate Exceptional Market Potential with Orthopedic Surgery Growth?

The suture anchor devices market in China is expanding at a CAGR of 4.8%, supported by increasing orthopedic procedure volumes, growing sports medicine awareness, and advancing surgical technology presence across the country's major hospital systems. The country's massive healthcare infrastructure investment and increasing adoption of international surgical standards are driving demand for quality fixation solutions in both public hospitals and private specialty clinics. Global orthopedic device companies and domestic manufacturers are establishing comprehensive supply channels to serve the growing demand for suture anchors while supporting the country's position as a major orthopedic care market.

China's healthcare sector continues to benefit from favorable government policies, expanding surgical training capabilities, and urbanization-driven healthcare modernization. The country's focus on healthcare quality improvement is driving investments in specialized orthopedic technology and arthroscopic equipment. This development is particularly important for suture anchor applications, as surgeons seek reliable fixation solutions for sports injuries and degenerative joint conditions to meet patient expectations.

• Rising sports participation and improving surgical technique education are creating opportunities for advanced fixation devices.
• Growing hospital arthroscopy program development and equipment investment are supporting increased access to minimally invasive procedures among patient populations.
• Expanding medical insurance coverage and medical tourism initiatives are driving innovative applications of suture anchors in shoulder and knee reconstruction operations.
• Domestic manufacturing capability development is enabling local production of orthopedic implants, supporting market growth and price competitiveness.

How does Saudi Arabia Maintain Healthcare Infrastructure Development Leadership?

The suture anchor devices market in Saudi Arabia is projected to exhibit strong growth with a CAGR of 4.3% through 2035, driven by healthcare facility expansion momentum and surgical center development capabilities. The country's Vision 2030 healthcare transformation initiatives and growing medical tourism focus are creating significant opportunities for suture anchor adoption across both domestic healthcare systems and international patient services.

Healthcare providers are leveraging their infrastructure investment programs to serve regional demand for advanced orthopedic procedures while supporting the country's position as a Middle Eastern healthcare hub.

The market benefits from substantial healthcare investment programs, expanding specialist training capabilities, and government-supported modernization systems. This development is particularly important for suture anchor applications, as hospitals seek advanced fixation technologies to attract regional patients and establish orthopedic excellence.

Strategic Market Considerations:

• Multi-specialty hospitals and sports medicine centers leading growth with focus on international standard care and medical tourism applications
• Regional healthcare development requirements are driving adoption of premium device portfolios from leading global manufacturers
• Infrastructure investment advantages supporting competitive positioning in Middle Eastern markets
• Government healthcare transformation initiatives strongly influencing technology adoption and quality standards

What is the Outlook for the Suture Anchor Devices Market in USA?

The USA's advanced healthcare market demonstrates sophisticated suture anchor deployment with documented clinical effectiveness in rotator cuff repair and shoulder stabilization through integration with established arthroscopic surgery infrastructure and evidence-based protocols.

The country leverages technical expertise in sports medicine and surgical innovation to maintain a 3.5% CAGR through 2035. Healthcare delivery systems, including major orthopedic specialty centers and academic medical institutions, showcase advanced fixation applications where suture anchor systems integrate with comprehensive surgical platforms and outcomes registries to optimize repair durability and patient satisfaction effectiveness.

American orthopedic surgeons prioritize clinical evidence and biomechanical performance in device selection, creating demand for premium suture anchors with advanced features, including FDA clearance and integration with established surgical techniques. The market benefits from high sports participation rates and willingness of patients and payers to invest in proven fixation technologies that provide superior clinical outcomes.

Strategic Market Considerations:

• Shoulder repair and knee reconstruction procedures leading growth with focus on sports injury treatment and active lifestyle preservation applications
• Regional sports medicine infrastructure are driving diverse product utilization from all-suture anchors to metallic high-strength constructs
• Clinical research strengths supporting domestic innovation partnerships and surgical technique refinement initiatives
• High sports injury prevalence and athletic participation rates beginning to drive preventive care and early intervention approaches

How will the Market for Suture Anchor Devices Progress in Japan?

The suture anchor devices market in Europe is projected to grow from USD 234.6 million in 2025 to USD 335.2 million by 2035, registering a CAGR of 3.7% over the forecast period. Germany is expected to maintain its leadership position with a 35.8% market share in 2025, rising to 36.5% by 2035, supported by its advanced orthopedic surgery infrastructure, comprehensive arthroscopic training programs, and strong sports medicine capabilities throughout major medical centers.

France follows with a 26.2% share in 2025, projected to reach 26.8% by 2035, driven by orthopedic specialization development, minimally invasive surgery adoption, and expanding sports medicine services serving both domestic and international athlete populations. The UK holds a 21.4% share in 2025, expected to increase to 21.9% by 2035, supported by National Health Service orthopedic programs and growing adoption of arthroscopic techniques.

Italy commands a 9.8% share in 2025, projected to reach 10.1% by 2035, while Spain accounts for 5.2% in 2025, expected to reach 4.2% by 2035. The Rest of Europe region, including Nordic countries, Eastern Europe, and smaller Western European markets, is anticipated to hold 1.6% in 2025, declining to 0.5% by 2035, attributed to market consolidation toward larger core markets with established orthopedic surgery infrastructure and sports medicine expertise capabilities.

Competitive Landscape of the Suture Anchor Devices Market

The suture anchor devices market is characterized by competition among established orthopedic device manufacturers, specialty arthroscopy companies, and sports medicine innovators focused on delivering high-quality, reliable, and biomechanically optimized suture anchors.

Companies are investing in anchor design advancement, biomaterial innovation, strategic surgeon partnership programs, and surgical education services to deliver effective, safe, and user-friendly fixation solutions that meet stringent orthopedic and regulatory requirements. Biomechanical standardization, clinical outcome validation protocols, and surgical technique development strategies are central to strengthening product portfolios and market presence.

Smith & Nephew plc leads the market with a 10.2% market share, offering comprehensive high-quality suture anchor solutions with a focus on surgical reliability and biomechanical performance for orthopedic applications. Zimmer Biomet Holdings Inc. provides specialized sports medicine portfolios with emphasis on shoulder reconstruction applications and comprehensive surgeon training services.

CONMED Corporation focuses on arthroscopic instrumentation and integrated fixation systems for surgical procedures serving global markets. Arthrex Inc. delivers innovative all-arthroscopic solutions with strong surgical technique development capabilities and surgeon education-focused expertise.

Johnson & Johnson Services Inc. (DePuy Synthes Inc.) operates with a focus on bringing comprehensive orthopedic solutions to specialized joint repair applications and established surgical markets. Stryker (Wright Medical Group Inc.) provides integrated sports medicine portfolios, including advanced anchor technologies, across multiple anatomical indications and surgical approaches.

Parcus Medical LLC (Medacta International) specializes in innovative fixation designs and minimally invasive solutions for orthopedic applications with emphasis on surgical efficiency optimization. OrthoMed Inc. provides regional distribution capabilities and technical expertise to enhance market accessibility and surgeon access to quality fixation devices.

Enovis Corporation and Medtronic focus on specialized orthopedic device solutions and premium product offerings for high-performance surgical applications, emphasizing quality differentiation and clinical innovation through advanced biomechanical engineering strategies.

Key Players in the Suture Anchor Devices Market

• Smith & Nephew plc
• Zimmer Biomet Holdings Inc.
• CONMED Corporation
• Arthrex Inc.
• Johnson & Johnson Services Inc. (DePuy Synthes Inc.)
• Stryker (Wright Medical Group Inc.)
• Parcus Medical LLC (Medacta International)
• OrthoMed Inc.
• Enovis Corporation
• Medtronic

Scope of the Report

Items	Values
Quantitative Units (2025)	USD 0.84 billion
Product	Non-absorbable, Absorbable
Material	Metallic Suture Anchors, Bio-absorbable Suture Anchors, Others
Tying Type	Knotless, Knotted Suture Anchors
End-use	Hospitals, Ambulatory Surgical Centers, Clinics
Regions Covered	North America, Europe, Asia Pacific, Latin America, Middle East & Africa
Countries Covered	USA, Germany, Japan, India, China, Brazil, Saudi Arabia and 40+ countries
Key Companies Profiled	Smith & Nephew plc, Zimmer Biomet Holdings Inc., CONMED Corporation, Arthrex Inc., Johnson & Johnson Services Inc. (DePuy Synthes Inc.), Stryker (Wright Medical Group Inc.), Parcus Medical LLC (Medacta International), OrthoMed Inc., Enovis Corporation, Medtronic
Additional Attributes	Dollar sales by product, material, tying type, and end-use, regional demand trends, competitive landscape, surgeon preferences for specific anchor designs, integration with arthroscopic techniques, innovations in biomaterial engineering, fixation strength optimization, and surgical outcome enhancement

Suture Anchor Devices Market by Segments

• Product :

  • Non-absorbable
  • Absorbable

• Material :

  • Metallic Suture Anchors
  • Bio-absorbable Suture Anchors
  • Others

• Tying Type :

  • Knotless
  • Knotted Suture Anchors

• End-use :

  • Hospitals
  • Ambulatory Surgical Centers
  • Clinics

• Region :

  • North America
    • USA
    • Canada
    • Mexico
  • Europe
    • Germany
    • France
    • UK
    • Italy
    • Spain
    • Nordic
    • BENELUX
    • Rest of Europe
  • Asia Pacific
    • China
    • India
    • Japan
    • South Korea
    • ASEAN
    • Australia & New Zealand
    • Rest of Asia Pacific
  • Latin America
    • Brazil
    • Argentina
    • Chile
    • Rest of Latin America
  • Middle East & Africa
    • Kingdom of Saudi Arabia
    • Other GCC Countries
    • Turkey
    • South Africa
    • Other African Countries
    • Rest of Middle East & Africa