Clutch Spring Wires Market - Global Industry Analysis 2016 - 2020 and Opportunity Assessment 2021 - 2031

Clutch Spring Wires Market: Definition & Introduction

A clutch spring wire is a device which is used in automotive transmission where it is used as a timing device in order to engage and disengage the motor engine and gear box. It consists of a spring mechanism wherein a spring is a mechanical system which has the property of retaining its shape when an applied load is taken off.

The springs comes into action when the clutch pedal is pressed in a manual transmission internal combustion engine vehicle. The springs are a medium of absorbing the impulse forces experienced by the clutch plate between the transmission and engine. It isolates the shocks onto the transmission from engine.

Clutch spring wires should have adequate strength so that it is able to absorb those impulses coming from engine, because stronger the clutch spring wires will be the more enhanced will it will be the ability to transmit power, with more durability and reliability, when it is operated. During the course of last two decades significant research and development is conducted and new methods for manufacturing these clutch spring wire have been adopted like the changes made in the material of the wire is one of the primary method adopted. Another procedure which is adopted and has gained much popularity amongst manufacturers is that the process of oil tempering the wire. This method has been proven to be bringing properties like high resistance to fatigue, heat and permanent deformation in the clutch spring wire.

Clutch Spring Wires Market: Dynamics

The demand drivers for clutch spring wire industry is the growth of automotive industry. The automotive industry constitutes of all the vehicles from passengers vehicles like cars and motor bikes to commercial vehicles like trucks and buses. Increase in per capita income and need of automobiles for convenience and luxury have boosted the automobile industry, subsequently leading to an increase in demand for clutch spring wires market.

Another crucial demand driver of clutch spring wire market is the fact that there is a demand for reliable and strong clutch spring wires, since the automotive manufacturers are focusing more to create a product which is more durable and reliable and stands way ahead of the crowd and way ahead of their competitors. Market participants are putting efforts in gaining their customers’ attention by manufacturing products which has less maintenance cost in the long run and thereby a workforce which specially works onto the domain of quality is allotted in each and every company these days, who takes care of minute but important factors in order to improve the quality of products which the company manufactures.

Manufacturers are focusing more and more on their supply chain networks and are trying to deliver and supply the goods in due time so that production never stops and thereby providing with the required specifications. Many automotive manufacturers are drawing their attention towards after sales too, reason being the same as above, for gaining customer satisfaction and grabbing their trust into their brand adding up to their brand value. In addition, manufacturers are providing customized solutions which is again adding up to their reputation in the market.

The supply-demand gap is a major challenge for the market participants operating in the market. This creates a buffer in the manufacturing industry thereby hindering the growth of clutch spring wire market. In order to comply with these market participants are poised towards expansion of their manufacturing capabilities and implementation of advanced manufacturing techniques to enhance production rates. This, in turn, is expected to have positive influence on the clutch spring wires market growth.

Clutch Spring Wires Market: Segmentation

The Clutch Spring Wires market can be segmented based on material type, by clutch spring type, and by vehicle type.

• Based on the material type, the prominent segments of Clutch Spring Wires are identified as:
  • Alloy Steel
  • Stainless Steel
  • Aluminium
• Based on the clutch spring wires type, the prominent segments of Clutch Spring Wires are identified as:
  • Diaphragm Spring
  • Central Spring
• Based on the vehicle type, the prominent segments of Clutch Spring Wires are identified as:
  • Light Commercial Vehicle
  • Heavy Commercial Vehicle
    • Heavy Trucks
    • Buses & Coaches
  • Passenger Car
    • Compact
    • Mid-Sized
    • SUV
    • Luxury vehicles

COVID-19 Crisis Impact

The ongoing COVID-19 crisis has caused drastic impact on all the industry verticals across the globe and still many industries are trying to get back to the new normal since then. During this tenure a major depletion in demand, capital investments and restraints in supply chain were observed. The automobile industry has been certainly struck by it too. The planned growth rate was ruptured to a great extent. The first three quarter of fiscal year 2020 were rough with all graphs showing nothing but downfall. The demand for new vehicles dropped during the COVID-19 pandemic situation, therein creating a proportional drop in the demand for clutch spring wire.

In the end use industry sector clutch spring wires are majorly used by the consumer as an issue in the vehicles or at the time of their routine check ups. The clutch spring wires are offered to the customers by direct procurement or via sales through manufacturer or distributor of the company. The sales occupies greater weightage of procurement usually. Post the Covid-19 pandemic the manufacturers of clutch spring wires have been focusing on strong supply chain management mechanism involving tie-ups with prominent regional dealers and distributors having rich clientele base and relationship management. This will bring about a positive change in the overall market of clutch spring wire.

Clutch Spring Wires Market: Regional Outlook

Looking at the geographical outlook of the clutch spring wires market, the sales of the product is distributed throughout the world with different regions creating different demands. The leading sales generator of the clutch spring wires market is the Asia Pacific region owing to presence of large number of automotive manufacturing in the countries such as China, India and Japan.

North America is estimated to create significant demand over the forecast period with substantial increase in the automotive fleet in the region on the back of high disposable income of the population in the countries such as the U.S. and Canada.

Stainless Steel Clutch Spring Wires to Hold Leading Share

Clutch spring wires made with stainless steel are expected to hold dominant share in the market. Moreover, the segment is estimated to witness substantial growth rate over the forecast period attributing to the corrosion resistance, ability to withstand higher loads and higher life of the material.

Analyst View Point on the Clutch Spring Wire Market

The clutch spring wire market is expected to rise year over year basis due to the rise in demand for both commercial as well as passenger vehicles. Moreover with changing government policies and regulations, there is an increase in sales of passenger vehicles in developing countries, which is further enhancing the demand for the clutch spring wires as well.

Clutch Spring Wires Market Participants:

List of some of the prominent market participants in Clutch Spring Wires market are:

• Suzuki Garphyttan
• KIS Wire
• Kobe Steel Ltd.
• POSCO
• N.V. Bekaert S.A.
• China Baowu Steel Group Corp., Ltd.
• Haina Special Steel
• American Spring Wire Corporation
• Nippon Steel SG Wire Co. Ltd.
• Pengg Austria GmbH
• Neturen America Corporation
• Zhengzhou Sinosteel

The research report on Clutch spring wire market presents a comprehensive assessment of the market and contain thoughtful insights, facts, historical data, and statistically supported and industry-validated market data. The Clutch spring wire market report also contains projections using a suitable set of assumptions and methodologies. The research report on Clutch spring wire market provides analysis and information according to market segments such as of product type, by installation and by material and by application.

The Clutch Spring Wire Market Report Covers Exhaustive Analysis on:

• Market Segments
• Market Dynamics
• Market Size
• Supply & Demand
• Current Trends/Issues/Challenges
• Competition & Companies involved
• Technology
• Value Chain

Regional Analysis Includes:

• North America (U.S., Canada)
• Latin America (Mexico, Brazil)
• Europe (Germany, Italy, France, U.K, Spain, Poland, Russia)
• South Asia (India, ASEAN, Rest of South Asia)
• East Asia (China , Japan, South Korea)
• Middle East and Africa (GCC Countries, South Africa, Northern Africa, Rest of MEA)
• Oceania ( Australia, New Zealand)

The Clutch spring wire market report is a compilation of first-hand information, qualitative and quantitative assessment by industry analysts, inputs from industry experts and industry participants across the value chain. The Clutch spring wire market report provides in-depth analysis of parent market trends, macro-economic indicators and governing factors along with market attractiveness as per segments. The Clutch spring wire market report also maps the qualitative impact of various market factors on market segments and geographies.

Report Highlights:

• Detailed overview of parent market
• Changing Clutch spring wire market dynamics in the industry
• In-depth Clutch spring wire market segmentation
• Historical, current, and projected market size in terms of volume and value
• Recent industry trends and developments
• Competitive landscape
• Strategies of key players and products offered
• Potential and niche segments, geographical regions exhibiting promising growth
• A neutral perspective on Clutch spring wire market performance
• Must-have information for Clutch spring wire market players to sustain and enhance their market footprint

NOTE - All statements of fact, opinion, or analysis expressed in reports are those of the respective analysts. They do not necessarily reflect formal positions or views of the company