Global Air Bearing Spindle Market: Introduction
Air bearing spindle is a motor-driven shaft that either position and transmits power to a cutting tool or holds a workpiece. Air bearing spindles have the advantages of very low error motions due to fluid-film-averaging effect, frictionless & high-performance positioning, cleanliness, and minimal maintenance. Thus, air bearing spindle is equipped with air bearings which allow the spindle to rotate at higher speeds.
For applications, such as semiconductor processing, air bearing spindle provide an accurate, smooth, and repeatable motion, thereby, resulting in a better surface finish. In contrast to ball bearing spindles, air bearings spindles ensure minimal subsurface fracture in machining of materials with a high level of hardness and deliver constant bearing stiffness. Importantly, air is the only lubrication used in air bearing spindle; therefore air bearing technology is ideal where there must be no contamination of the working environment and work piece. Subsequently, aforementioned advantages linked with air bearings encourage the demand for air bearing spindle. Favorable economic conditions and growing electronic industry will spring up the growth of the global air bearing spindle market. Subsequently, the aim of the study is to analyze the most recent trends and dynamics in the global air bearing spindle market.
Global Air Bearing Spindle Market: Dynamics
With an advent of new technologies, the demand for optical and electronics product is expected to surge and consequently, the production of semiconductors to elevate. This demand will proliferate lucrative opportunities for the manufacturers of the air bearing spindle. Moving ahead, one of the vital applications of air bearing spindle is in PCB (Printed Circuit Board) manufacturing. PCB manufacturing is growing exponentially on the back of growing demand for computers, LCDs, LEDs, electronic gadgets, and among others suggesting a positive outlook for air bearing spindle market.
Robust sales growth in the semiconductor market will strengthen the demand for air bearing spindle in the manufacturing facilities across the globe. In addition to this, the electronics industry continues to evolve rapidly with new technologies continuing to put increased demands on the manufacturer/supplier. Thus, the positive growth outlook is anticipated for air bearing spindle market. Lastly, developments and ongoing improvements in some of the key areas of air bearing spindle are consistently redefining the boundaries of what can be achieved and broadening the scope for the use of the air bearing spindle.
Global Air Bearing Spindle Market: Segments
The global air bearing spindle market can be segmented on the basis of product type, operation, application, and region
On the basis of product type, the global air bearing spindle market can be segmented as:
- Aerostatic Air Bearing Spindle
- Aerodynamic Air Bearing Spindle
On the basis of operation, the global air bearing spindle market can be segmented as:
- Micro Machining
- High Precision Machining
- Heavy-duty Machining
On the basis of application, the global air bearing spindle market can be segmented as:
Global Air Bearing Spindle Market: Regional Outlook
Growth in the North American electronics industry has been witnessing a solid outlook for past few years which will squarely impact the sales of the air bearing spindle. The sales growth of electronics manufacturing services has plateaued at low double-digit growth over the past few years. China, Taiwan, and Japan are the global drivers in terms of electronics production against the backdrop of significant production capabilities and low cost manufacturing. Consequently, air bearing spindle market will continue to observe hefty growth rates over the coming years. Moreover, India and SEAP countries are foreseen to witness healthy demand for electronics and auxiliary products. Growth of mobile phone market in India coupled with increase in number of mobile phone factories will likely to upsurge the demand for air bearing spindle. Also, increase in consumer spending across the Middle East & Africa set to encourage high production levels and a substantial demand for air bearing spindle.
Global Air Bearing Spindle Market: Key Participants
List of some of the prominent market participants in the global air bearing spindle market discerned across the value chain include:
- Westwind Air Bearings (Novanta Inc.)
- NTN Corporation
- Seagull Solutions, Inc.
- FME Corp.
- Fives Landis Ltd. (Cranfield Precision)
- Air Bearings Ltd
- PI Nelson Air Corp
- Cranfield Precision
The research report – air bearing spindle presents a comprehensive assessment of the market and contains thoughtful insights, facts, historical data, and statistically supported and industry-validated market data. The study on air bearing spindle market also contains projections using a suitable set of assumptions and methodologies. The research report provides analysis and information according to air bearing spindle market segments such as geographies, application, and industry.
The report covers exhaustive analysis on:
- Market Segments
- Market Dynamics
- Market Size
- Supply & Demand
- Current Trends/Issues/Challenges
- Competition & Companies involved
- Value Chain
Regional analysis includes:
- North America (U.S., Canada)
- Latin America (Mexico, Brazil)
- Western Europe (Germany, Italy, France, U.K, Spain)
- Eastern Europe (Poland, Russia)
- Asia Pacific (China, India, ASEAN, Australia & New Zealand)
- Middle East and Africa (GCC Countries, S. Africa, Northern Africa)
The report is a compilation of first-hand information, qualitative and quantitative assessment by industry analysts, inputs from industry experts and industry participants across the value chain in the air bearing spindle market. The report – air bearing spindle provide in-depth analysis of parent market trends, macro-economic indicators and governing factors along with market attractiveness as per segments. The report also maps the qualitative impact of various market factors on air bearing spindle market segments and geographies.
- Detailed overview of air bearing spindle market
- Changing air bearing spindle market dynamics in the industry
- In-depth market segmentation
- Historical, current, and projected air bearing spindle market size in terms of volume and value
- Recent industry trends and developments
- Competitive landscape
- Strategies of key players and products offered
- Potential and niche segments, geographical regions exhibiting promising growth
- A neutral perspective on air bearing spindle market performance
- Must-have information for air bearing spindle market players to sustain and enhance their market footprint
NOTE - All statements of fact, opinion, or analysis expressed in reports are those of the respective analysts. They do not necessarily reflect formal positions or views of the company
Benefits of Becoming a Fact.MR Client
- Access to our global market coverage
- Periodic updates on your sector
- Exclusive discounts and offers
- Greater flexibility for customization
- Quick-research assistance for ad-hoc needs
- Access to credible insights Fact.MR analyst interactions
- Access to Fact.MR tools and research to fuel strategy development