Superabsorbent polymers have perceived increased penetration in the medical sector, with rapid technological developments, and significant funding from investors to research facilities for developing high performance products.
Road mishaps and accidents that lead to severe wounds and injuries are a key demand determinant for superabsorbent polymers.
The Centers for Disease Control and Prevention (CDC) estimates road traffic injuries to become 7th leading cause of mortality worldwide by 2030-end.
Superabsorbent wound dressings have gained paramount importance in the wound care on the coattails of its extremely absorbent and unique core for exudate management.
These dressings are deemed highly effective in soaking up wound exudate from venous ulcers, burns, surgical incisions, and chronic wounds.
Chronic wounds illustrate an underestimated problem for healthcare systems worldwide.
Chronic wound prevails as a chronic issue, despite billions of spending by healthcare systems in wound care.
However, routine clinical practice and research in wound management have meant that advancements in science are imminent for better understanding and addressing chronic wounds.
2-acrylamido-propane sulphonic acid (AMPS) and Polyaspartic acid (PASP)-based superabsorbent polymers, which are sensitive to pH and glucose conditions, are being exploited for chronic wound dressing.
The medical superabsorbent polymers market has been envisaged to depict an impressive rise in the period of forecast, 2018 to 2027.
Roughly US$ 8,300 Mn worth of medical superabsorbent polymers will be sold to the medical industry worldwide by 2027-end.
Superabsorbent Spacer Fabrics Development for Exuding Wound Dressing Application
Exuding wound care entails the need for dressing that quickly absorb exudates, and exert effective moisture management during the healing of wounds.
Currently available commercial wound dressings are linked with a slew of limitations such as low-absorbency and high evaporation.
In addition, non-occlusive nature of these wound dressings, and the requirement for secondary dressing for retaining a moist environment on the surface of wound, have further confined their performance and effectiveness.
Recognizing the concern, manufacturers have been inclining their preference toward spacer fabrics for use as absorbent medical products.
Recent research efforts have given birth to superabsorbent spacer fabrics for application in exuding wound care.
The three-layered structure of these fabrics deliver faster wetting speed and twice the absorbency compared to foam dressings.
Additionally, air permeability of superabsorbent spacer fabrics is relatively higher, making them suitable for applications in exuding wound dressings.
Medical Superabsorbent Polymers Market: Emphasis on Sustainability to Create New Avenues for Manufacturers
Superabsorbent polymers have gained immense popularity owing to their pivotal role in the daily care products industry, such as diapers.
Superabsorbent materials based on petroleum have sought significant use in the development of these products, however the upward trend of sustainability and green products are now driving efforts for re-invention.
Scientists across the globe are therefore working on the production of new eco-friendly alternatives.
Past researches have depicted the ability of bio-based materials, mainly proteins, in absorbing aqueous solutions with effectiveness similar or even relatively higher than that of synthetic superabsorbent polymers.
Additionally, advancements in the agricultural sector have been enabling the provision of essential protein-concentrated feedstock procured from side-streams apropos of the bio-refinery field.
Scientists have recognized the transmutation procedures of protein structures and interactions that are necessary to promote water-uptake in the protein-based superabsorbent polymers.
The insights aggregated are being leveraged for developing suitable alternatives to their unsustainable petroleum-based counterparts, which in turn is likely to create new avenues for manufacturers in the upcoming years.
Medical Superabsorbent polymers Market Taxonomy & Segmentation Analysis
This report also offers a scrutinized study on the market for medical superabsorbent polymers in terms of a segmentation analysis.
The market has been divided into five key segments, namely, product type, end-user, application, technology, and region.
These segments have been analyzed in detail, engulfing market forecasts and estimates at a country and regional level.
The segmentation analysis offered can be useful for the report readers in understanding probable opportunities and potential markets for the target product – medical superabsorbent polymers.
A taxonomy table incorporated in the report illustrates all the market segments in a systematic manner as depicted below.
Medical Superabsorbent Polymers Market Scope Of The Report
On account of their ability to retain enormous amount of water or any aqueous solution, superabsorbent polymers have sought increased penetration in the medical industry.
Absorbing high amounts of liquids and exudates, medical superabsorbent polymers prevent infections, and enable faster healing of injuries.
These polymers, in the form of non-woven and woven fabrics, are also being used for manufacturing various surgical and medical equipment such as surgical drapes, wound dressings, sponges, and medical gauzes.
Fact.MR’s recently published report renders valuable insights and accurate forecasts on the medical superabsorbent polymers market for the period of forecast, 2018 to 2028.
Key parameters such as impact of current and future growth determinants & deterrents, expected developments & regulatory scenario, demand statistics, and raw material procurement & supply are elucidated and analyzed.
Influence of these parameters on the medical superabsorbent polymers market’s growth has been quantified for deriving a market growth rate estimate.
Competitive Landscape Assessment on Medical superabsorbent polymers Market
In its concluding chapter, the report quantifies revenues share of prominent companies in the medical superabsorbent polymers market, and offers an in-depth overview of the market’s competitive scenario.
A detailed description has been delivered on all the market players profiled in the report, which includes intelligence in terms of their company overview, key financials, product overview, past as well as latest developments.
A SWOT analysis on each market player profiled has been incorporated in the report, along with information on their new product developments, and market expansion strategies such as collaborations and partnerships.
The scope of the report is offer its readers with authentic information and insights on the medical superabsorbent polymers market, to enable them in making better future decisions for growth of the businesses.
Robust Research Methodology to Provide Authentic Market Intelligence
A tested & proven research approach is employed by analysts at Fact.MR for evaluating key industry dynamics and offering precise and authentic market intelligence.
A blend of primary & secondary research has been implemented for offering estimates and forecasts on the medical superabsorbent polymers market.
Secondary research forms initial phase of our research, wherein the analysts conduct extensive information mining by referring to up-to-date and verified data resources that include technical journals, regulatory and government published material, and independent studies, which forms the basis of the market estimates.
All the market estimates and forecast offered are further verified via an exhaustive primary research, wherein interviews are conducted with leading market participants, and industry experts.
These comprehensive primary interviews aid in validating the information procured and gain significant industry insights, estimations and key developments.
Need an Exclusive Report for your Unique Requirement?
- Related Reports -
- Our Clients -
- Evaluate How Fact.MR's Report Can Help. -
Is the market research conducted by Fact.MR?
Yes, the report has been compiled by expert analysts of Fact.MR, through a combination of primary and secondary research. To know more about how the research was conducted, you can speak to a research analyst.
What research methodology is followed by Fact.MR?
Fact.MR follows a methodology that encompasses the demand-side assessment of the market, and triangulates the same through a supply-side analysis. This methodology is based on the use of standard market structure, methods, and definitions.
What are the sources of secondary research?
Fact.MR conducts extensive secondary research through proprietary databases, paid databases, and information available in the public domain. We refer to industry associations, company press releases, annual reports, investor presentations, and research papers. More information about desk research is available upon request.
Who are the respondents for primary research?
Fact.MR speaks to stakeholders across the spectrum, including C-level executives, distributors, product manufacturers, and industry experts. For a full list of primary respondents, please reach out to us.
Is a sample of this report available for evaluation?
Yes, you can request a sample, and it will be sent to you through an email.