Innovations Aimed at Improving Breakup Process during Fuel Injection through Injector Nozzles
Design developments in injectors and injector nozzles are aimed at optimizing the breaking up process which in turn determines efficiency of ignition and combustion process. Despite the introduction of multiple innovation in this regard, the fuel injection engineering community remains bemused in fathoming complete breakup process, in particular primary breakup mechanism. Recently, computer fluid dynamics (CFD) simulation has been used to understand the mechanism of primary breakup and importance of nozzle geometry on spray structure. Manufacturers in the automotive injector nozzle market have started incorporating simulation process during in development of injector nozzle design for new high-performing engines with enhanced fuel economy and lower emission.
Piezoelectric Injector Nozzles Remain a Preferred Choice for Diesel Fuel Engines
The prime difference between piezo injectors and other diesel injectors is the presence of piezo material that enables delivery of high speed and precision fuel injection. Leading injector manufacturers have harnessed the piezo technology in their diesel fuel injector nozzle. While the technology is applied for both gasoline and diesel engines, in consistently changing parameters of diesel engine, piezo technology is highly utilized. As the technology is well-proven for its efficiency, manufacturers in the automotive injector nozzle market are actively engaged in delivering piezoelectric diesel injector nozzle for different country-specific fuel qualities and with compatibility at all pressure levels.
Gasoline Direct Injection (GDI) Adoption to Increase Significantly amid Pre-eminence of Gasoline Port Fuel Injection (PFI)
Port fuel injector design has been traditionally and widely used in the internal combustion engines, however, PFI lacks efficiency in delivering fuel economy as compared to gasoline direct injection. Supremacy of GDI technology lies in better engine performance with high injection pressure and accurate fuel delivery. Although port fuel injection technology dominated the automotive injector nozzle market with almost 50% of total market share in 2017, gasoline direct injection technology is estimated to gain over 66 BPS and account for over 6.5% CAGR through 2022.
Design Developments in Injector Nozzle Configurations to Achieve Optimum Emission Standards
Emission standards continue to determine the development of the automotive industry, particularly the internal combustion engine. Automotive injector nozzles play a vital role in determining the performance and efficiency of internal combustion engines. All the innovations that are introduced or are under the process of R&D are aimed at complying with the strict emission standards for fuel efficiency and reduction of exhaust gases and particulates. Manufacturers across the global automotive industry are adopting novel designs, injector orifices, and injector nozzle designs to complement the stricter emission standards and improve the overall engine efficiency.
Emergence of Alternative Fuel Vehicles to Challenge the Automotive Injector Nozzle Market
Automotive manufacturers’ interest in alternative fuel vehicles is increasing rapidly against the backdrop of growing emphasis on reducing emission levels and sustainable solutions. The market for electric vehicles (EVs) is gaining ground while consistently introducing electric variants of prominent vehicle types. As consumers are becoming more conversant with the issues of global warming and role of automobiles in vitiating the environment, EV demand has seen a significant spike in past half a decade. While automotive injector nozzle is an integral part of internal combustion engines, declining reliance on conventional fuels and emergence of alternative fuel vehicles is expected to confine the progress of the automotive injector nozzle market in the coming years.
Remunerative Passenger Cars Segment to Gain Traction of OEMs in the Automotive Injector Nozzle Market
All-time high sales of passenger cars have significantly engaged OEMs to explore profitability. The proliferation of the passenger cars segment is backed by ongoing urbanization and booming consuming class which actively look for convenient automobile options. Led by this, the sales of compact cars and SUVs have to increase considerably than that of commercial vehicles. With the growing ownership of passenger cars, demand for automotive injector nozzle in the passenger cars segment dominates and is expected to account for nearly 60% share of global revenues through 2022.
The competitive landscape section in the automotive injector nozzle market report delivers an exhaustive list of key market players that are categorized in manufacturers, suppliers, and distributors. A comprehensive overview of the product offerings, recent innovation R&Ds in the pipeline, and notable business strategies are discussed in the individual company profile.
Key companies profiled in the automotive injector nozzle market include Camcraft Inc., Haynes Corporation, Alternative Fuel Systems Inc., Infineon Technologies AG, Magneti Marelli S.p.A., Keihin Corporation, Eaton Corporation PLC, Robert Bosch GmbH, Denso Corporation, Delphi Automotive PLC, and Continental AG among others.
Manufacturers continue to incorporate technology innovations to deliver improved automotive injector nozzles with greater fuel efficiency and low emissions. For example, Delphi Automotive Systems has incorporated ANSYS computational fluid dynamics (CFD) software to develop the fuel injector nozzle geometry that delivers optimum engine performance.
The report offers comprehensive insights on the business strategies of all the profiled players in the automotive injector nozzle market. Discuss with the author(s) of the report to know more.
Know More Details About the Report
An automotive injector nozzle is a component of the fuel injector system which transmits and sprays the fuel. Automotive injector nozzle serves primary functions of controlling the flow of fuel and modifying the speed, direction, mass, shape or pressure of the fuel stream. Automotive injector nozzles are prominently used in the internal combustion engines of gasoline and diesel fuels.
About the Report
Fact.MR has published a study on the automotive injector nozzle market and published a report titled “Automotive Injector Nozzle Market Forecast, Trend Analysis & Competition Tracking: Global Market insights 2017 to 2022”.
Focusing on the key trends, the automotive injector nozzle market analysis is backed by thorough analysis of historical data and current market scenario. Based on such exhaustive research, the report has derived the most credible forecast of the automotive injector nozzle market during the forecast period.
Avail customized purchase options for your needs
Additional Questions Answered
Apart from the aforementioned insights, the report addresses other vital market facets that hold potential in transforming the global market landscape.
- Will there be an immediate impact of green technology adoption on the automotive injector nozzle market performance through 2022?
- Amidst the divergent and evolving regulatory standards, how will the automotive injector nozzle market evolve?
- Across global regions, which will be the rapidly expanding region in the automotive injector nozzle market through 2022?
Fact.MR compiled a report on the automotive injector nozzle market for the forecast timeline of 2017 to 2022. The chief objective of this research study on automotive injector nozzle market is to define and illustrate the prevailing business opportunity in the automotive injector nozzle market on the basis of fuel type, vehicle type, technology, and region. The report on automotive injector nozzle market also includes circumstantial information about key factors such as drivers, opportunities, and challenges impacting the expansion of automotive injector nozzle market. The report on automotive injector nozzle market offers unmatched intelligence on the prevailing business opportunities, yet in an extremely comprehensible manner. The overall report on automotive injector nozzle market is fragmented into various chapters to induce a systematic learning that will help the readers make viable business decisions.
Chapter 1 – Executive Summary
The report commences with an affluent executive summary which offers a quick snapshot of the landscape of automotive injector nozzle market. It pinpoints the leading segments and their respective rationalities to impart a lucid understanding. It also equips the reader with crisp insights on opportunities abounding for key stakeholders of automotive injector nozzle market.
Chapter 2 – Market Overview
In this chapter, the readers can find an affluent definition of an automotive injector nozzle along with its importance in the automotive industry. This chapter also gives the reader an introduction to the automotive injector nozzle market with the help of an all-inclusive taxonomy.
Chapter 3- Market Analysis and Forecast by Fuel Type
This chapter entails historical, present, and future market value and volume projections of automotive injector nozzle market based on the fuel types- gasoline and diesel.
Chapter 4- Market Analysis and Forecast by Vehicle Type
This chapter sheds light on the projections of automotive injector nozzle market, both in terms of value and volume. These predictions of automotive injector nozzle market are based on the vehicle types- passenger cars, light commercial vehicles, and heavy commercial vehicles.
Chapter 5- Market Analysis and Forecast by Technology Type
This chapter embodies volume as well as value projections and Y-o-Y growth analysis of automotive injector nozzle market based on technology used. The report on automotive injector nozzle market addresses crucial information on technology types used for manufacturing nozzles such as gasoline port fuel injection, gasoline direct injection, and diesel direct injection.
Chapter 6- Market Analysis and Forecast by Region
This chapter elaborates on the prevailing business opportunities in the automotive injector nozzle market across North America, Latin America, Europe, Japan, APEJ, and MEA over the forecast timeline.
Chapter 7- North America Automotive Injector Nozzle Market Analysis and Forecast
This chapter focuses on the North America automotive injector nozzle market for filtering the opportunities across United States and Canada during the forecast period. This chapter also incorporates a multipronged revenue comparison of North America automotive injector nozzle market based on fuel type, vehicle type, and technology type.
Chapter 8- Latin America Automotive Injector Nozzle Market Analysis and Forecast
This chapter highlights the Latin America automotive injector nozzle market and concomitant business opportunities. This chapter also includes a dynamic revenue comparison of Latin America automotive injector nozzle market based on fuel type, vehicle type, and technology type.
Chapter 9- Europe Automotive Injector Nozzle Market Analysis and Forecast
This chapter talks about Europe automotive injector nozzle market and prevailing possibilities for an affluent business expansion. This chapter also addresses a revenue comparison of Europe automotive injector nozzle market based on fuel type, vehicle type, and technology type.
Chapter 10- Japan Automotive Injector Nozzle Market Analysis and Forecast
This chapter enunciates about the Japan automotive injector nozzle market and key demand generators facilitating business augmentation. Moreover, a revenue comparison of the Japan automotive injector nozzle market has also been added by fuel type, vehicle type, and technology type.
Chapter 11- APEJ Automotive Injector Nozzle Market Analysis and Forecast
This chapter of the report offers an in-depth assessment of lucrative avenues in the Asia-Pacific Excluding Japan (APEJ) automotive injector nozzle market. This chapter features an exclusive market dynamics to explain growth course of automotive injector nozzle market in Greater China, India, South Korea, and ASEAN countries during the forecast period.
Chapter 12- MEA Automotive Injector Nozzle Market Analysis and Forecast
This chapter focuses on overall growth trajectory of MEA automotive injector nozzle market across leading countries in the Middle East and African region. Readers can leverage on the detailed information on how the automotive injector nozzle market will grow in the MEA region.
Chapter 13- Company Profile
This chapter in the automotive injector nozzle market report features names of the key companies operating in the automotive injector nozzle market. The profiling is exclusively based on foothold of companies in the market, their revenue shares, key differential strategies, focus areas, and many more.
The above data points have been procured from several resources such as published financial data, quarterly financial statements, 10-K & 10-Q filings, annual reports, local newspapers, company websites, company press releases, published trade data, and other data sources.
Need an Exclusive Report for your Unique Requirement?
- Our Clients -
- Evaluate How Fact.MR's Report Can Help. -
Is the market research conducted by Fact.MR?
Yes, the report on the radiation proctitis treatment industry has been compiled by expert analysts of Fact.MR, through a combination of primary and secondary research. To know more about how the research was conducted, you can speak to a research analyst.
What research methodology is followed by Fact.MR?
Fact.MR follows a methodology that encompasses the demand-side assessment of the market, and triangulates the same through a supply-side analysis. This methodology is based on the use of standard market structure, methods, and definitions.
What are the sources of secondary research?
Fact.MR conducts extensive secondary research through proprietary databases, paid databases, and information available in the public domain. We refer to industry associations, company press releases, annual reports, investor presentations, and research papers. More information about desk research is available upon request.
Who are the respondents for primary research?
Fact.MR speaks to stakeholders across the spectrum, including C-level executives, distributors, product manufacturers, and industry experts. For a full list of primary respondents, please reach out to us.
Is a sample of this report available for evaluation?
Yes, you can request a sample, and it will be sent to you through an email.